Happymodel

Happymodel Mobeetle6 Whoop 牙籤機 2合1

$3,137.65 $3,694.67

新的 Mobeetle6 BNF 套裝機將是世界上最輕的量 Whoop 機,希望你會喜歡。我們也非常期待這款 BNF 與新的 Diamond F4 ELRS 飛控的表現。

規格:

品牌: Happymodel
產品: Mobeetle6 whoop and toothpick 2-IN-1 FPV Racer Drone
軸距: 65mm
尺寸: 80mm*80mm*30mm
重厘: 17.5g (不含電池)

功能:

最輕的 1S Whoop 和牙籤二合一 fpv 無人機
帶有牙籤機架可轉換
強大而高效動力
最輕的1s AIO 5IN1 F4 飛控
全新 Unibell SE0702 無刷電機,帶 pcb 線板
內置 OPENVTX 高達 400mw
低調的外殼設計

包裝內容:

產品名稱 數量
65mm whoop 機架 (Mobula6 機架 ) 1
65mm 牙籤機架 (Mobeetle6 機架 ) 1
選項 1: DiamondF4 ELRS 內置 SPI ELRS 接收 1
選項 2: DiamondF4 FR 內置 SPI FRSKY 接收
SE0702 KV23000 Unibell 無刷電機 4
Gemfan 1210 31mm 槳 (4cw+4ccw) 1
Runcam Nano3 1
內置 5.8G 48ch 25mw-400mw OPENVTX 1
1s 300mah Lipo 電池 2
Mobula6 外殼 1
拆槳工具 1
螺絲批 1

 

後備零件規格:

磨打 Mode:SE0702 KV23000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.5g
No.of Cells(Lipo):1S only
Weight:0.19g
Material:PC
Pitch:1 inchProps Dia:30mm
Center Hole Dia:1mm
飛控 (ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280
(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OPEN VTX
Built-in SPI ELRS V2.0/Frsky receiver
Built-in 5V 1A BEC
Onboard 4in1 電調 MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GH 接收 Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware
Onboard Frsky SPI D8 接收 SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Runcam Nano3 Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo 電池 Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5gConnector: PH2.0


You may also like

Recently viewed